8,477 Active Recruiters     Over 2 Million Candidates Globally

Advanced
  1. Keep me logged in
  2. forgot password
cancel

Checkout Jobs Basket (0)

You can checkout a maximum of 150 jobs.

Signup Better for Candidates

  • Create a free virtual CV and let recruiters find you
  • Automatically have your profile matched to suitable Oil & Gas positions
  • Link to your profile using it as a free online CV
  • Store all your employment documents to your profile for easy sending
  • Always receive feedback on positions applied for

Signup Better for Recruiters

  • Suitable candidates automatically matched to your position
  • View candidate profiles for free
  • No more waiting for candidates to respond to job advertisements
  • Only ever pay when you match a candidate to a position
  • No more cold calling and sorting through out dated CVs
RSS

8 Live Jobs by Woodland Consultancy Services


  • LiveTrainee CAD Technician (10482)

    United KingdomEngineering > CAD/CAM

    Key Requirements

    • A/AS Level Maths or B.Tech Level 3 Maths • Good English skills It is important to note that applicants will be required to complete a test at interview stage to assess these skills.

    Job Description

    TRAINEE CAD TECHNICIAN – PERMANENT – SURREY Our Client, an international oil and gas contractor, is looking for a Trainee CAD Technician to join their team based at their office in Surrey. This is a recognized apprenticeship and our Client requires a college or school leaver. This is a Four-year course and a fantastic career opportunity to get into the Oil & Gas industry, which offers candidates the chance to train and grow within large corporate organisation. QUALIFICATIONS/EXPERIENCE: • A/AS Level Maths or B.Tech Level 3 Maths • Good English skills It is important to note that applicants will be required to complete a test at interview stage to assess these skills. COURSE STRUCTURE: • Year One: Full time College at Richmond College – time spent within the office during half terms and holidays. • Year Two: Office and Part time HNC Construction and Build Environment (Civils) • Year Three: Office and Part time HNC Construction and Build Environment (Civils) • Year Four: Complete training full time in house SALARY: Initially £15,000 to £18,000 to £19,000 per annum depending on qualification however, this will increase as and when the various stages of training have been completed, each year. ADDITIONAL: The success rate in this scheme is very high and at least 80% of the trainees are still with the company in the CAD department as well as other departments, where further training has been provided (Methods and Structural to name a few). We are instructed to only submit to our Client candidates whose qualifications and experience match client’s specification and must be able to work within the UK.

    Type: Staff / OfficeSalary: Not stated

    Trainee CAD Technician (10482). Our Client, an international oil and gas contractor, is looking for a Trainee CAD Technician to join their team based at their office in Surrey. This is a recognized apprenticeship and our Client requires a college or school leaver. This is a Four-year course and a fantastic career opportunity to get into the Oil & Gas industry, which offers candidates the chance to train and grow within large corporate organisation.

    Posted: Tue 14 Jan at 16:24       Expires: Sat 14 Mar at 16:24

  • LiveJunior Drilling Product Design Engineer (10742)

    KazakhstanEngineering > Mechanical

    Key Requirements

    Required: • Bachelor of Science in Mechanical Engineering from an accredited program. • Two years’ experience in a professional engineering position. • Investigative mind inclined toward developing practical solutions to real-world problems. • Proficiency with CAD, SolidWorks and Microsoft Office. Preferred: • Coursework and experience in drilling products design. • Proficiency with hand tools, power tools and fabrication equipment. • The ideal candidate shall have high level manufacturing of Chinese Drilling products.

    Job Description

    MECHANICAL DESIGN ENGINEER – DIRECT HIRE CONTRACT – KAZAKHSTAN Our Client, a Major international Oil and Gas, design and construction contractor is seeking a Mechanical Design Engineer to work on a project in Kazakhstan. QUALIFICATIONS/EXPERIENCE: Required: • Bachelor of Science in Mechanical Engineering from an accredited program. • Two years’ experience in a professional engineering position. • Investigative mind inclined toward developing practical solutions to real-world problems. • Proficiency with CAD, SolidWorks and Microsoft Office. Preferred: • Coursework and experience in drilling products design. • Proficiency with hand tools, power tools and fabrication equipment. • The ideal candidate shall have high level manufacturing of Chinese Drilling products. JOB SCOPE: • To help design and test the planned upcoming line of Wellhead & Drilling tools. • To create dependable, hardworking products. • You will exercise your creativity and determination every day as you develop prototypes, place them through rigorous testing and release them for manufacturing when they meet or exceed our specifications for product quality and safety. JOB RESPONSIBILITIES: • Study plans for upcoming generation of Wellhead & Drilling tools, and develop strategies for improving upon current models • Design products using CAD, and consult with engineering and manufacturing teammates to ensure that designs are feasible • Develop and build prototypes and run tests to measure their level of function • Record and evaluate testing data, altering designs as necessary to bring them to safety, performance and efficiency standards • Consult with fabrication teams during product manufacturing, advising them on design specifications and providing physical assistance when required • Research competitor products quarterly and collaborate with product development team to generate ideas for making the products the best ones on the market • Calculate cost estimates for final product designs, and release reports to supervisors, incorporating costs of labour, material, delivery and overhead • Attend weekly team meetings to provide progress reports, obtain updates on colleagues’ progress, strategize on steps for following week and acquire information about projected emerging product lines. Duration: 1 year renewable contract Status: Single status Residential basis working 5 days a week, 8 hours per day Benefits: Client pays medical insurance/medical evacuation, Accommodation (single status standard). 50 work days of annual leave (unpaid) and 3 paid home leave return flights per residential assignment year (1st trip after 3 months of work). Salary Please quote a gross annual salary in USD. We are instructed to only submit to our Client candidates whose qualifications and experience match client’s specification.

    Type: Long Term Contract / Site, OfficeSalary: Please quote a gross annual salary in USD.

    Mechanical Design Engineer (10742). Bachelor of Science in Mechanical Engineering from an accredited program.

    Posted: Mon 06 Jan at 12:36       Expires: Fri 06 Mar at 12:36

  • LiveLead Compressor Engineer (10820)

    KazakhstanEngineering > Mechanical

    Key Requirements

    • Higher Education Degree (in Mechanical Engineering or similar) is mandatory, preferably including education in Western institution of higher learning • Minimum of 15 years of experience • Fluent knowledge of English language is required (Russian or Chinese as an option) • Knowledge and experience in international PMC contracts related to the development and execution of EPC Contracts • Experience in Pipelines, Gas-Turbine Compressors and Power Generation, particularly in respect of Compressor or Power Stations. • Experience in major Onshore or Offshore Oil & Gas Projects, or for Major Oil Company or EPC Contractor would be a plus. • Experience in pre-award technical activities, involving qualification of Bidders, would be preferable. • Contracts Development Experience, supporting the drafting of technical scope of work of ITB’s, particularly for EPC scope and Lump Sum conditions. • Knowledge of relevant API, ASME, ISO. • Mechanical design for Rotating Equipment (e.g. Turbine, Compressor, Pumps) and related auxiliaries system (e.g. Sealing, Fuel Gas Skid, Lube Oil, Mineral Oil Skid). • Experience in the review of Mechanical engineering documentation and selection of Turbo Compressor based on the Vendor Performance Data. • Preparation and hands-on experience in Mechanical engineering documentation (specifications, engineering requisition, equipment data sheets, etc.), including training/mentoring of local staff, where applicable. • Sound experience of interfacing and integration issues of GTCU’s with the Compressor Station (in coordination with discipline specialists): o Design of mechanical interconnectivity of GTCU process and ancillary equipment, piping systems and valves: shutdown, ant surge, hot gas bypass valves, fuel gas and seal gas system, lube oil, drainage systems, etc. Including tracing and winterization, supports, consideration loads on nozzles, etc. o GTCU civil interfaces and foundations issues: vibration loads, grouting, etc. o Electric and power interconnections between systems: main power, GTCU starter system, Spinning system, Combustion air pre-heating, emergency lubrication, emergency power (Diesel) o GTCU related instrumentation selection and installation issues o Requirements of Unit Control System/ESD/ F&G and requirements of safety related systems. o Support to GA review of compressor hall, equipment and skid arrangement, of piping and cable routing, utilities (heating, ventilation, etc) distribution

    Job Description

    LEAD COMPRESSOR ENGINEER – DIRECT HIRE CONTRACT –KAZAKHSTAN Our Client, a Major international Oil and Gas contractor, is looking for a Lead Compressor Engineer to work on a project based in Kazakhstan. QUALIFICATIONS/EXPERIENCE: • Higher Education Degree (in Mechanical Engineering or similar) is mandatory, preferably including education in Western institution of higher learning • Minimum of 15 years of experience • Fluent knowledge of English language is required (Russian or Chinese as an option) • Knowledge and experience in international PMC contracts related to the development and execution of EPC Contracts • Experience in Pipelines, Gas-Turbine Compressors and Power Generation, particularly in respect of Compressor or Power Stations. • Experience in major Onshore or Offshore Oil & Gas Projects, or for Major Oil Company or EPC Contractor would be a plus. • Experience in pre-award technical activities, involving qualification of Bidders, would be preferable. • Contracts Development Experience, supporting the drafting of technical scope of work of ITB’s, particularly for EPC scope and Lump Sum conditions. • Knowledge of relevant API, ASME, ISO. • Mechanical design for Rotating Equipment (e.g. Turbine, Compressor, Pumps) and related auxiliaries system (e.g. Sealing, Fuel Gas Skid, Lube Oil, Mineral Oil Skid). • Experience in the review of Mechanical engineering documentation and selection of Turbo Compressor based on the Vendor Performance Data. • Preparation and hands-on experience in Mechanical engineering documentation (specifications, engineering requisition, equipment data sheets, etc.), including training/mentoring of local staff, where applicable. • Sound experience of interfacing and integration issues of GTCU’s with the Compressor Station (in coordination with discipline specialists): o Design of mechanical interconnectivity of GTCU process and ancillary equipment, piping systems and valves: shutdown, ant surge, hot gas bypass valves, fuel gas and seal gas system, lube oil, drainage systems, etc. Including tracing and winterization, supports, consideration loads on nozzles, etc. o GTCU civil interfaces and foundations issues: vibration loads, grouting, etc. o Electric and power interconnections between systems: main power, GTCU starter system, Spinning system, Combustion air pre-heating, emergency lubrication, emergency power (Diesel) o GTCU related instrumentation selection and installation issues o Requirements of Unit Control System/ESD/ F&G and requirements of safety related systems. o Support to GA review of compressor hall, equipment and skid arrangement, of piping and cable routing, utilities (heating, ventilation, etc) distribution REQUIRED SKILLS: • Must have sound knowledge and understanding of technical terms and conditions. • Familiar with all phases of Engineering Design (i.e. Conceptual, Feasibility, Basic, Feed and Detailed Design). • Familiar with all phases of EPC Contracts. • Awareness of compliance and audit processes. • Ability to identify changes and improvements to the technical documentation and procedures to reflect Client’s changing requirements. • Knowledge of computer based systems including, CAD, Database Management systems, Excel, Word, Microsoft Office or equivalent software packages. • Be proactive, a self-starter and ability to work without supervision. • Systematic thinker and good organizational skills / time management. • Strong personality with ability to be firm and persuasive without authority. • Team player within and across functions. • Sensitive to Client’s requirements and Client-focused. JOB SCOPE: The successful candidate is requested to work as Lead Engineer - Compressor to validate the Supply Specification and Engineering Requisition for the Turbo Compressor Package, to follow up the development of its supply and to support its correct integration within the Compressor Station. At pre-EPC contract award stage, the work involved the review of the Basic Design documentation prepared by the Subcontractors in charged to develop the design (Designers) and, if necessary, to make proposal of alternative to improve the completeness and quality of the documentation reviewed. At post-EPC contract award stage, the work includes the review of the Detail Design documentation prepared by the EPC Contractors, and, if necessary, to make proposal of alternative to improve the completeness and quality of the documentation reviewed, in respect of the budget approved, attending kick – off meetings, assistance to the Client in the assessment and validation of the technical issues at the base of Change order or Claims raised by the EPC Contractors. The Candidate, in coordination with the above priority mansions, is also requested to provide support to Client Management in its activities such as (but not limited to): reviewing and producing technical documentation for Business Development (i.e. manhours/time for quotations), training and support to Clients Engineers in ongoing Projects, etc. Rate: Euro 45 per worked hour net of Kazakh tax Duration: 1 year contract with possible extensions Status: Single status Residential basis working 5 days a week, 8 hours per day. Benefits: Client pays medical insurance/medical evacuation, Accommodation (single status standard). Flights and transport. We are instructed to only submit to our Client candidates whose qualifications and experience match client’s specification.

    Type: Long Term Contract / OfficeSalary: Euro 45 per worked hour net of Kazakh tax

    Lead Compressor Engineer (10820). The successful candidate is requested to work as Lead Engineer - Compressor to validate the Supply Specification and Engineering Requisition for the Turbo Compressor Package, to follow up the development of its supply and to support its correct integration within the Compressor Station.

    Posted: Tue 18 Feb at 11:58       Expires: Sat 18 Apr at 11:58

  • LiveSenior Pipeline Engineers 10511

    United KingdomEngineering > Pipeline

    Key Requirements

    • Must have a Degree qualification in a relevant discipline.

    Job Description

    SENIOR PIPELINE ENGINEERS – PERMANENT OR CONTRACT – SURREY Our Client, a Major international Oil and Gas, design and construction contractor is urgently seeking Senior Pipeline Engineers. There are roles available on both a contract basis as well as on a permanent staff basis, and the jobs are based in their offices in Surrey. QUALIFICATIONS & EXPERIENCE: • Must have a Degree qualification in a relevant discipline. DUTIES & RESPONSIBILITIES: Working within the detailed design and installation analysis Engineering Department, the Offshore Pipeline Engineer will be involved in the development of front end engineering activities spanning from FEED, detailed design and starting from the tendering phase. Main duties/responsibilities of the job position include: • Contribute to tender preparation and development of fit-for-purpose competitive proposals. • Participate in the execution of front end engineering activities, typically including screening and comparative analysis of alternative solutions, pipeline engineering activities such as routing and layouts, on-bottom stability, sizing, in-place analyses (on-bottom roughness, free span, in-service buckling, trawl gear interaction, expansion), riser and spool design, MTOs, etc. • Contribute to know-how development/retention, including development of discipline tools/procedures and transfer of lessons learnt. • Attend meetings with Client (e.g. design reviews, presentation of study results, etc.). RATE/SALARY: Please quote what rate or salary you would require when applying. BENEFITS: Large company benefits are provided for perm staff. Offices are very Close to the Station We are instructed to only submit to our Client candidates whose qualifications and experience match client’s specification and must be able to work within the EU/UK.

    Type: Staff or Contract / OfficeSalary: Please quote what rate or salary you would require when applying.

    Senior Pipeline Engineers 10511. Must have a Degree qualification in a relevant discipline.

    Posted: Mon 17 Feb at 11:51       Expires: Fri 17 Apr at 11:51

  • LiveLead Pipeline Engineer (10669)

    United Kingdom > LondonEngineering > Pipeline

    Key Requirements

    • Must have a Degree qualification in a relevant discipline • Must have experience working in pipeline design engineering within the offshore oil and gas industry. • Must have previous experience working at a lead/Senior level • Must have experience of developing at conceptual FEED phase • Must have experience of tendering • Should have experience of routing and layouts, on-bottom stability, sizing, in-place analyses (on-bottom roughness, free span, in-service buckling, trawl gear interaction, expansion), riser and spool design, MTOs, etc.

    Job Description

    LEAD PIPELINE ENGINEER – PERMANENT – SURREY Our Client, a Major international Oil and Gas, design and construction contractor, is seeking a Lead Pipeline Engineer to work in their Surrey offices. QUALIFICATIONS/EXPERIENCE REQUIRED: • Must have a Degree qualification in a relevant discipline • Must have experience working in pipeline design engineering within the offshore oil and gas industry. • Must have previous experience working at a lead/Senior level • Must have experience of developing at conceptual FEED phase • Must have experience of tendering • Should have experience of routing and layouts, on-bottom stability, sizing, in-place analyses (on-bottom roughness, free span, in-service buckling, trawl gear interaction, expansion), riser and spool design, MTOs, etc. JOB SCOPE: Working within the detailed design and installation analysis Engineering Department, the Offshore Pipeline Engineer will be involved in the development of front end engineering activities spanning from FEED, detailed design and starting from the tendering phase. RESPONSIBILITES: Main duties/responsibilities of the job position include: • Contribute to tender preparation and development of fit-for-purpose competitive proposals. • Participate in the execution of front end engineering activities, typically including screening and comparative analysis of alternative solutions, pipeline engineering activities such as routing and layouts, on-bottom stability, sizing, in-place analyses (on-bottom roughness, free span, in-service buckling, trawl gear interaction, expansion), riser and spool design, MTOs, etc. • Contribute to know-how development/retention, including development of discipline tools/procedures and transfer of lessons learnt. • Attend meetings with Client (e.g. design reviews, presentation of study results, etc.). SALARY: Negotiable with large company benefits. Please quote the Salary you would be looking for when applying. BENEFITS: Very close to the Station. We are instructed to only submit to our Client candidates whose qualifications and experience match client’s specifications and are eligible to work in the UK/EU.

    Type: Staff / OfficeSalary: Negotiable - please quote

    Lead Pipeline Engineer, Permanent, Surrey. Working within the detailed design and installation analysis Engineering Department, the Offshore Pipeline Engineer will be involved in the development of front end engineering activities spanning from FEED, detailed design and starting from the tendering phase.

    Posted: Mon 17 Feb at 11:51       Expires: Fri 17 Apr at 11:51

Latest Oil & Gas News







Featured Companies

  • View All JobsOMPA

    Offshore Marine People & Academy (OMPA) is a global provider of personnel and training to the renewables, oil & gas, telecommunications and marine industries.

    With over 15 years' industry experience, we work with candidates to match them to the right roles and equip them with the skills and knowledge needed to succeed. Our job is to exceed your expectations.

    Visit us online: offshorempa.com

  • View All JobsChronos Oil and Gas

    Chronos Oil and Gas is one of the fastest growing and best placed recruitment agencies in the sector.

    With over 300,000 candidates on our database and an international team of specialist recruiters we work with clients to staff major projects around the world.

    Register your CV at www.chronosoilandgas.com

  • View All JobsNatural Resources

    Natural Resources is a UK based recruitment company providing personnel of all disciplines and nationalities worldwide.

    We represent clients and candidates at all levels who operate globally within oil & gas, renewables, nuclear, power, mining, marine, drilling, construction and petrochemicals. Our client base includes energy and construction.

    Visit Natural Resources at natural-resources.com