5893 Active Recruiters     165727 Live & Available Candidates

Advanced Oil and Gas Job Search
  1. Keep me logged in
  2. forgot password
cancel

Checkout Jobs Basket (0)

You can checkout a maximum of 150 jobs.

Signup Better for Candidates

  • Create a free virtual CV and let recruiters find you
  • Automatically have your profile matched to suitable Oil & Gas positions
  • Link to your profile using it as a free online CV
  • Store all your employment documents to your profile for easy sending
  • Always receive feedback on positions applied for

Signup Better for Recruiters

  • Advertise Oil and Gas jobs for free
  • Suitable candidates automatically matched to your position
  • View candidate profiles for free
  • No more waiting for candidates to respond to job advertisements
  • Only ever pay when you match a candidate to a position
  • No more cold calling and sorting through out dated CVs

Pipe Support Calculation

Posted By:Orion Group

Orion Group are one of the world''s leading engineering recruitment agencies specialising in contract and permanent manpower for the majority of the world''s largest energy specialists. The group have 34 offices located internationally from Calgary and Houston to offices in the Middle East and Asia Pacific.

www.orionjobs.com

You Can't Apply

This position is no longer open for applications.

Design > Piping

Status: Cancelled

Our client is one of the world's leading energy companies. Operating on five continents, they employ over 70,000 people worldwide.

They are currently recruiting for the position of Pipe Support Calculation, based in Norway.

Job Details

Location: Norway > Drammen

Salary: Negotiable

Working Locations: Site

Posted: 07/01/2012 01:00:00

Expires: 04/02/2012 01:00:00

Key Requirements

Our client is one of the world's leading energy companies. Operating on five continents, they employ over 70,000 people worldwide.

They are currently recruiting for the position of Pipe Support Calculation, based in Norway.

Job Description

79930 - Pipe Support Calculation

Our client is one of the world's leading energy companies. Operating on five continents, they employ over 70,000 people worldwide.

They are currently recruiting for the position of Pipe Support Calculation, based in Norway.

Job Description

  • Pipe support calculation
  • Check design with regard to pipe design, stress requirements, clashes, etc
  • Follow on activities
  • Response to site queries from fabrication and installation
  • Document administration

Skills & Experience

  • Diploma or higher
  • Experience with beam calculation and use of Eurocode 3
  • Extensive experience
  • English language required

This is a contract position.

The rate for this position is negotiable.

If you feel that you are well suited to the above opportunity and would like to find out more then please contact Orion Group for more information or apply by forwarding your current CV quoting reference 79930.

Orion Group currently supplies over 3,500 personnel in roles including Oil & Gas, Renewables, Power & Utilities, Construction, Mining, Rail, Aerospace, IT & Telecoms, Office and Commercial. With 29 offices worldwide, Orion Group operate in the UK and internationally and in January 2009, were named the UK's number one for engineering recruitment.


Similar Jobs to Pipe Support Calculation

  • LiveCAD Draughtsperson/Estimator

    United Kingdom > EdinburghDesign > CAD

    Key Requirements

    898498 - CAD Draughtsperson/Estimator
    Our client is currently recruiting for the position of CAD Draughtsperson/Estimator, based in Cupar.

    Job Description

    898498 - CAD Draughtsperson/Estimator

    Our client is currently recruiting for the position of CAD Draughtsperson/Estimator, based in Cupar.

    Job Description

    Our Client requires a full time permanent CAD Draughtsperson with estimating skills to work within their fabrication facility based in Fife.

    Candidate must have AutoCAD experience and a background in Oil and Gas and steel fabrication. The position would involve the preparation of client drawings for transfer to the workshop.

    This is a permanent position.

    The salary for this position is negotiable.

    If you feel that you are well suited to the above opportunity and would like to find out more then please contact Orion Group for more information or apply by forwarding your current CV quoting reference 898498.

    Orion Group currently supplies over 4,500 personnel in roles including Oil & Gas, Renewables, Power & Utilities, Construction, Mining, Rail, Aerospace, IT & Telecoms, Office and Commercial. With 40 offices worldwide, Orion Group operates internationally and in October 2013, were named the UK's number one for Oil & Gas recruitment.

    Type: Long Term Contract / SiteSalary: Negotiable

    898498 - CAD Draughtsperson/Estimator

    Our client is currently recruiting for the position of CAD Draughtsperson/Estimator, based in Cupar.

    Posted: Wed 23 Jul at 9:00       Expires: Wed 20 Aug at 9:00

  • LiveProject Manager

    United Kingdom > BlackpoolDesign > Plant and Platform

    Job Description

    Are you an experienced Project Manager seeking new prospects? This is a fantastic chance to join the Delivery Team, at the design stage of a substantial contract within the nuclear industry. With opportunities in the North West for both permanent members of staff and contractors, this truly is an exciting time to make your impact within the nuclear sector. The successful candidate will provide fit for purpose solutions for complex high risk / high value projects.

    If you have the above experience, able to commute to the North West and want enhance your career in the Nuclear industry, we would be very keen to hear from you!

    To be considered for the Delivery Team please submit your CV to register your interest.

    Capita Resourcing welcome applications from all suitably qualified people regardless of gender, race, disability, age or sexual orientation.

    Capita Resourcing is a trading name of Capita Resourcing Ltd. Services offered are those of an Employment Agency and Employment Business. Applicants will be required to register with us.

    Type: Long Term Contract / SiteSalary: £40 - £55 per hour + ltd depending on experience

    Are you an experienced Project Manager seeking new prospects? This is a fantastic chance to join the Delivery Team, at the design stage of a substantial contract within the nuclear...

    Posted: Tue 22 Jul at 10:00       Expires: Tue 19 Aug at 10:00

  • LiveMechanical Design Engineer - Aberdeen

    United Kingdom > AberdeenDesign > Graphic

    Job Description

    Design Engineer - Aberdeen My client within the Oil & Gas sector is looking for a graduate engineer ideally with 2 or more years of design experience. The right candidate will have good energy and be looking to join a growing department with lots of future prospects. Role: The candidate would be required to take ownership of daily tasks in the design office and report to the Lead Design Engineer. The candidate would be required to answer queries from the workshop on existing designs and drawings, and act as a point of contact to ensure that the project team have all the information they need. The candidate would be required to review design enquiries from clients and check these against standard company equipment and assess the extent of changes required to complete a new system. The position would involve management of a team of draughtsmen where necessary to complete drawing tasks for all of the above. The candidate would need to have a good engineering understanding, and ideally have experience with cable and pipe handling equipment. The candidate would need to have a good work ethic and be able to respond quickly to enquiries as they come in. Keywords: Mechanical Design Engineer, Oil & Gas, Aberdeen, UK IC Resources - your first contact for electronics and engineering jobs.

    Type: Long Term Contract / OfficeSalary: Salary DOE

    My client within the Oil & Gas sector is looking for a graduate engineer ideally with 2 or more years of design experience. The right candidate will have good energy and be looking to join a growing department with lots of future prospects.

    Posted: Tue 22 Jul at 8:00       Expires: Tue 19 Aug at 8:00

  • LiveMain Automation Contractor Coordinator (MAC Coordinator)

    Kazakhstan > AtyrauDesign > Electrical and Instrument

    Key Requirements

    1. At least 5 years in a similar coordination and lead role. 2. At least 10 years in core instrumentation and control systems engineering. 3. B.Eng. in Instrumentation and Control Systems Engineering or Equivalent. 4. Experience with engineering discipline activities coordination. 5. Strong writing and presentation skills. 6. Experience within EPC industry on large O&G projects. 7. Only EPC design experience, non site based, will be considered towards minimum experience.

    Job Description

    Design and Engineering experience most of the following technical areas: 1. Reports to Lead Instrument Engineer. 2. Main Automation Contractor Coordinator coordinates activities between the EPC and MAC. 3. Ensures integration of engineering schedule between the MAC and EPC. 4. Ensure that queries are responded within turnover period. 5. Ensure correctness of data and deliverables exchange between MAC and EPC. 6. Liaise with various stake holders and disciplines including client organization to initiate, address and resolve technical and procedural issues between EPC and other stake holders. 7. Adhere to HSE principles, project specifications and Kazakhstan technical standards. 8. Single point of contact between MAC and Engineering for data exchange. 9. Project coordination activities and set up meetings with MAC. 10. Knowledge and understanding of Instrumentation and Control System principals, hardware and software. Soft Skills: 1. Must be able to work with minimum supervision. 2. Must be familiar with and committed to HSE principles. 3. Must be conversant in English. Russian language skills would be advantageous. 4. Knowledge of International Standards for Instrumentation and Control Systems highly regarded. 5. Knowledge of and experience with local Kazakhstan (ROK) Regulatory Codes and Standards preferred but not mandatory.

    Type: Long Term Contract / Site, OfficeSalary: Negotiable

    At least 13-years of overall experience in Instrumentation and Control Systems out of which at least 3-years in a similar role. Bachelors Degree in Instrumentation Engineering or equivalent.

    Posted: Mon 21 Jul at 8:06       Expires: Mon 04 Aug at 8:06

  • LiveMechanical Design Engineer - Down Hole Tool Design - Aberdeen

    United Kingdom > AberdeenDesign > CAD

    Key Requirements

    Mechanical Design Engineer - Down Hole Tool Design - Aberdeen - to work on the design and development of new and existing tools and systems, generate and maintain appropriate documentation to record the design and development phase.

    Job Description

    Mechanical Design Engineer - Down Hole Tool Design - Aberdeen Job Description To work on the design and development of new and existing tools and systems. Generate and maintain appropriate documentation to record the design and development phase. The ideal candidate will have an appropriate engineering or science degree and 2-4 years of downhole tool design and development experience. Principal duties: Design of mechanical components and systems; Stress analysis calculations; Generate CAD models and drawings (layouts, assemblies, detail, client etc); Generate procedures (assembly, test etc); Generate engineering test reports; Checking of engineering documents; Perform test build of new equipment; perform prototype testing; Advising on ordering of equipment for new tools and development work; Participate in design reviews; Support internal and external customers on technical queries; Maintain design files & related documentation; Support operations by working at client sites (onshore and offshore); Required Knowledge & Experience: CAD applications (Ideally Autodesk Inventor); MathCAD; Materials - metals and elastomers; MS Office applications; Mechanical components; Oilfield downhole tools; Stress analysis calculations; Project Engineering; (beneficial but not essential) National and international standards related to Oilfield equipment. Key words: Mechanical Design Engineer - Down Hole Tool Design - Aberdeen - CAD, mathcad, metals, elastomers,mechanical design IC Resources - your first contact for electronics and engineering jobs.

    Type: Long Term Contract / OfficeSalary: £50000 - £55000 per annum + up to £55k

    Mechanical Design Engineer - Down Hole Tool Design - Aberdeen - to work on the design and development of new and existing tools and systems, generate and maintain appropriate documentation to record the design and development phase.

    Posted: Sun 20 Jul at 8:00       Expires: Sun 17 Aug at 8:00

Featured Recruiters

  • View All JobsChronos Oil and Gas

    Chronos Oil and Gas is a Specialist oil and gas recruitment company with offices in over 20 countries globally. Chronos looks after recruitment for hundreds of the industry's leading companies so be sure to register your CV on our website today.

    Register your CV at www.chronosoilandgas.com.

  • View All JobsCenergy

    Cenergy is a dynamic company that supplies expert workforce solutions to the oil and gas industry. We provide specialized energy personnel, safety solutions, inspection solutions, logistics and vendor management support.

    We provide logistics assistance by meeting our clients' planning, dispatching and tracking needs for marine, air, and ground transportation.

    Visit our website: www.cenergyintl.com.

  • View All JobsOrion Group

    Orion Group are one of the world's leading engineering recruitment agencies specialising in contract and permanent manpower for the majority of the world's largest energy specialists.

    The group have 34 offices located internationally from Calgary and Houston to offices in the Middle East and Asia Pacific.

    Visit Orion Group at www.orionjobs.com.