You Can't Apply
This position is no longer open for applications.
Candidates can apply for up to 150 jobs in 28 days.
Offshore (Kazakhstan), 28/28
Working Locations: Offshore
Posted: 17/01/2011 09:00:00
Expires: 14/02/2011 09:45:00
Key RequirementsPlease note that we don’t consider CV if the Minimum Pre selection Requirements are not met fully!
Qualifications : Engineering HND (or equivalent), minimum 10 years experience in oil and gas and at least 5 years in planning.
Experience in onshore and offshore petrochemical projects for at least 10 years.
Experience in working directly or indirectly for a major oil company
Experience in preparing and executing control procedures for both cost and planning
Experience in Project start-up sequence and logic planning
· To provide a full planning, work management and analysis of the contract assigned.
· To ensure plans are tracked and reported. Highlighting and offering solutions to problems.
· Be pro-active in all matters relating to Cost, Planning and Risk Analysis.
· Maintain all plans in readiness for monthly reporting.
· Ensure that all interfaces are identified, agreed and reviewed on a weekly basis.
· Ensure that all short term critical tasks are reviewed on a weekly basis.
· Assist in the development and maintaining of the department budget cost estimates.
· Maintain close liaison with other Agip KCO departments associated with Kashagan Development.Responsible for training Kazakh personnel when requested
Competences Familiar with both project and corporate contract and finance procedures
Knowledge of computer based planning tools e.g. Primavers P3e, P5
Familar with planning probabilistic and associated software
Familar with the operational aspects of offshore platforms and Drill Rigs
Ability to work without supervision
Ability to initiate and promote the discipline of cost/planning with other engineering/operations departments
Ability to prepare strategy plans to ensure that the planning tools are capable of meeting the company's business needs
Ability to assist in management reviews of existing Appraisal work activities
Ability to create/update planning estimates/control methods and procedures to reflect the latest engineering and project execution philosophies
Familiar with the requirements and structure of Integrated Planning
Similar Jobs to Planning Engineer
1. Higher education 2. Prospects for technical development of the venture. 3. Technical, economical, ecological and social requirements to the projects under design. 4. Construction codes and rules. 5. Standards, technical specifications and other guidelines development and completion of engineering design and other supporting documents. 6. Standardization Fundamentals. 7. Construction economics and organization. 8. Automation of engineering and computing works (CAD). 9. Designing techniques. 10. Basics of labour protection legislation.
main functions: 1. Performance of work on working out the project execution plan, its implementation and coordinating the project activities aimed to achieve the milestone and goals established. 2. Development of design solutions in portions or full scope. 3. Engineering coordination for development of project sections (art); follow on supervision for construction; participation in project appraisal. duties: 1. Develop the most relevant design solutions on basis of the last achievements in engineering, advanced and foreign experience in designing and construction by inpidual section (parts) or full scope. 2. Organize investigation in order to ensure implementation of new design solutions. 3. Prepare proposals to use more progressive and economically competitive design solutions. 4. Form tasks for development off project sections (parts) and hand them over to performer. 5. Verify develop design solutions in compliance with the task assigned. 6. Carry out engineering coordination for development of project sections (parts) widely using computer aided design facilities and participate in solving issues concerning these sections at all the stages and phases of designing, construction, start-up and engineering facilities development process. 7. Participate in agreeing design solutions and discussing a project at Higher Bodies and Expertise Organs. 8. Carry out field supervision for construction on issues within the frame of his competence. 9. Prepare proposals for changes to be made to working documents related to implementation of new project documents taking into account actual construction progress. 10. Analyze and adopt experience in designing solutions. 11. Prepare feedbacks and opinions on project standards, technical specifications and other documents related to designing and construction. 12. Participate in projects appraisal, preparing editions of technical documentation, in seminars and conferences with his qualification.
Type: Long Term Contract / SiteSalary: 675 GBPlocation - Aksai; work pattern - 28/28; duration - 1 year
Posted: Tue 22 Apr at 12:59 Expires: Tue 29 Apr at 12:59
LiveLead Pipng/Mechanical Engineer
Higher education (University degree or higher) in the relevant speciality and not less than 10 years of work experience as per speciality. Good knowledge of the following: -Onshore oil & gas upstream facilities including process plants, pipelines, wells, utilities and offsites in cold, remote regions. -Oil and gas engineering in a Brownfield plant modifications environment -Engineering practice for detailed design engineering and preparation of workpacks. -Working with other disciplines, sections and departments to meet delivery dates. -Supervision of engineering design teams -Constructability issues and of structuring designs to minimise plant downtime. -Risk assessment / HAZOP. -Organization and planning of engineering detailed design works. -Assess quality of technical requirements for projects. -RoK and international codes, regulations and standards relating to the preparation of technical documentation. -Latest developments and current best practice in Piping and Mechanical engineering. Permit to Work System
The following are the main functions of Lead Piping/Mechanical Engineer: Deliver all Piping and Mechanical engineering design activities within schedule whilst maintaining technical integrity and complying with HS&E Values. Manage Piping and Mechanical discipline design teams and associated administrative functions across multiple projects Promote the training and development of National Piping and Mechanical engineers. Provide technical oversight of Piping and Mechanical aspects of projects. Interface with EPC engineering services contractor(s), to review, validate and accept their Piping and Mechanical work and deliverables (calculations, design, specifications, etc) that have been developed. Co-ordinate the Piping and Mechanical with other disciplines to comply with project specifications and requirements. Assist in the development (review and comment) of Project Piping and Mechanical specifications. Assist in the development and implementation of organizational processes and procedures and assure compliance with approved processes and procedures. Co-ordinate project design activities within the section to ensure the achievement of quality, completion and profit objectives. Plan and co-ordinate the activities of the group and to allocate staff to ensure that the Project Design tasks are completed to schedule and in accordance with Corporate or Project engineering standards. Prepare budgets and time schedules for management approval and plan assigned projects
Type: Long Term Contract / SiteSalary: 840 GBP grossLead Piping/Mechanical Engineer is located in Aksai. The work is connected with trips to the Field . Lead Piping/Mechanical Engineer reports directly to Engineering Execution Manager.
Posted: Thu 17 Apr at 6:32 Expires: Thu 01 May at 6:32
LiveSenior Instrument Engineer
1. At least 8-years for Intermediate and at least 12-years for Senior position, within EPC industry in the Oil and Gas projects. 2. B.Sc. in Instrumentation Engineering or Equivalent.
Design and Engineering experience most of the following technical areas: 1. Reports to the Lead Instrument Engineer. 2. Mentor junior staff, and provide technical support where required. 3. Adhere to HSE principles, project specifications and Kazakhstan technical standards. Soft Skills: 1. Able to travel/stay on site to conduct surveys, participate in meetings etc. 2. Must be able to work with minimum supervision. 3. Conversant with HSE principles and able to communicate affectively in English. Russian Language skills will be an added advantage. 4. Conversant with the local KAZAK Regulatory Codes and Standards is preferred but not mandatory. Conversant with International Standards for Instrumentation and Control is required. 4. Produce Instrument Index, Control Narratives, Cause & Effect. 5. Develop and maintain Process Automation System Data Base. 6. Develop DCS, ESD & Fire & Gas I/O Schedules. 7. Perform instrument flow, control valve and relief valve sizing calculations and produce/develop data sheets. 8. Provide engineering input to instrument cable routing diagrams, cable schedules, SP3D model, P&IDs, packaged equipment, commodity PO/RFQ, Vendor Data Review. 9. Actively participate in HAZOP and SIL reviews and perform Intrinsic Safety Calculations. 10. Check and provide engineering input to loop diagrams, instrument location drawings, F&G location drawings, junction box location drawings. 11. Prepare Instrument MTO, coordinate with various disciplines to ensure MTO quantities by others is taken into account. 12. Strong knowledge working with SmartPlant SPI, Loop, Specification, Calculation modules. 13. Knowledge of SP3D Modeling.
Type: Long Term Contract / SiteSalary: Not statedJob details It is a contract role, so your direct employer will be our agency – PRC Career-Holdings, Client – KING. Location: Atyrau Rotation: 6 weeks duty/2 weeks off Duration: 12 months, renewable Starting: ASAP
Posted: Wed 02 Apr at 5:13 Expires: Sun 01 Jun at 5:13
LiveSenior Contracts Engineer
Qualification: College or university with a degree in quantity surveying, construction management, project management or engineering related field. Member of professional body or association. Experience: Ten or more years of professional related experience Experience in similar (LC, Contracts, Procurement or Engineering) functions Knowledge of English Previous experience of working in Kazakhstan (not mandatory).
Responsible for the day to day administration of Contracts and the upkeep and maintenance of contract records and files Pre Contract Award: Develop for approval the list of bidders for each inpidual Contract. Issue pre-screening and prequalification questionnaires. Expedite the review and assessment of pre-screening and prequalification responses. Prepare Tender lists for approval. Develop Invitations to Tender (RFP’s) complete with all commercial exhibits and obtain the necessary approvals. Issue RFP’s to approved Tenderers. Receive and review questions from Tenderers, obtain the necessary responses from disciplines and issue tender clarifications (bulletins) to all Tenderers. Arrange and attend mid tender interviews/meetings and distribute minutes of these meetings timeously. Arrange and attend tender opening meetings and ensure the confidentiality of the opened tenders. Coordinate the tender review process including arranging and where applicable attending tender clarification meetings and issuing the minutes in a timely manner. Obtain the results of tender reviews and prepare and issue for approval, tender award recommendations. Prepare and issue final Contract documents for award of Contracts. Distribute signed Contract documents. Post Contract Award : Manage and chair the kick-off, weekly progress, commercial and all formal meetings with Contractors. Receive, register, review and action all correspondence from Contractors internally. Prepare or review all correspondence to Contractors. Identify changes in scope of work with Contractor in accordance with procedures and Contract terms. Ensure commercial actions arising from revised drawings and specifications are undertaken. In conjunction with Site Engineering and Construction manage issue of Instructions to Contractors. Ensure that change, claim, backcharge, invoice and insurance registers are maintained up to date. Prepare contract amendments as required. Process Contractor's applications for payment, together with invoices, for verification of measurement and initiation of Payment Certificates. Evaluation of interim payments and the final account with Contractor. Verify compliance with Contract and transmit to Accounts Department for onward payment actions. Maintain records and co-ordinate with Engineering and Construction departments to ensure that any claims or backcharges on Contractors are properly and efficiently executed. Liaise with Resident Construction Manager on any items within the Contract that have financial and/or contractual implications. Initiate contract close out on completion of the work or specific portion thereof
Type: Long Term Contract / Site, OfficeSalary: Not statedLocation: Atyrau Rotation: 6 weeks duty/2 weeks off Duration: 12 months, renewable Starting: ASAP
Posted: Fri 28 Mar at 6:10 Expires: Tue 27 May at 6:10
LiveLead HVAC Field Engineer
More than 15 years' experience Responsible for: All HVAC Equipment in the Contractors Compound
• Developing performance specification for EPC Contractors • Reviewing and approving contractor and vendor submittals • Monitoring contractor performance • Providing input to progress reports • Maintain records • Provide recommendations on payment to contractors • Attend regular meeting with Contractors, TCO and Third Parties • Visit manufacturers shops where required • Identify Change Orders and Trends • Advise on contractor PVN’s • Ensure contractor complies with project requirements • Provide technical guidance • Develop detail engineering where needed for one off type buildings
Type: Long Term Contract / SiteSalary: Not statedLocation: Tengiz (Kazakhstan) Rotation: 6 weeks duty/2 weeks off Duration: 12 months, renewable Starting: ASAP
Posted: Thu 27 Mar at 11:13 Expires: Mon 26 May at 11:13